PakTools logoPakToolsPakistan's First Free Online Tools

Everyday Pakistan

Electricity Bill Calculator — WAPDA vs K-Electric

By Marwat • Published 16 November 2026 • Updated 16 November 2026 • 8 min read

Electricity bills in Pakistan explained: the 2025-26 slab rates, fixed charges, 18% GST, and how a WAPDA DISCO bill differs from a K-Electric bill in Karachi.

Electricity Bill Calculator in Pakistan — free tool by PakTools

Try the free tool →

Electricity Bill Calculator in Pakistan

Estimate your monthly electricity bill from units consumed, slab by slab.

Every month, millions of households in Pakistan open an electricity bill and wonder how the total was calculated. The units are there, the rate is there, but the bill also has slab charges, fixed charges, taxes, and adjustments that make the final figure much larger than the units multiplied by one rate. This guide explains the electricity bill calculator and the difference between a WAPDA bill and a K-Electric bill: the slab rates, the fixed charges, the 18 percent GST, and worked examples in rupees for 100, 300, and 500 units.

First, an important clarification. WAPDA is the name most people use for the public electricity system, but WAPDA itself no longer distributes electricity to homes. Distribution is done by the distribution companies, known as DISCOs: LESCO in Lahore, IESCO in Islamabad, FESCO in Faisalabad, MEPCO in Multan, PESCO in Peshawar, HESCO in Hyderabad, SEPCO in Sukkur, and QESCO in Quetta. Karachi is different: it is served by K-Electric, a private utility. When this guide says WAPDA, it means the public DISCOs, and when it says K-Electric, it means Karachi's supplier.

The two systems use the same slab idea but different fixed charges, and their bills look different. The slab rates in this guide are 2025-26 residential estimates, as used in our Electricity Bill Calculator: tariffs vary by DISCO and by month, and they can change with government decisions, so check your own bill for the exact rates that applied to you. Try our free Electricity Bill Calculator after reading the examples below: enter your units and it will calculate the slab charges, the fixed charges, and the GST for you.

How the Slab System Works

Electricity in Pakistan is charged by slabs, which means different units are charged at different rates, like the income tax slabs. The 2025-26 residential slab energy charges used in our calculator are: 1 to 50 units at Rs 4.50 per unit, 51 to 100 units at Rs 9.50 per unit, 101 to 200 units at Rs 13.00 per unit, 201 to 300 units at Rs 18.00 per unit, 301 to 400 units at Rs 25.00 per unit, 401 to 500 units at Rs 28.00 per unit, 501 to 600 units at Rs 30.00 per unit, 601 to 700 units at Rs 32.00 per unit, and above 700 units at Rs 35.00 per unit. Each slab is charged only for the units inside it, and then all the slab charges are added together.

That progressive structure is the key to understanding the bill. A household that uses 300 units does not pay 300 units at Rs 18.00. It pays the first 50 units at Rs 4.50, the next 50 at Rs 9.50, the next 100 at Rs 13.00, and only the last 100 at Rs 18.00. The average rate is therefore much lower than the top slab rate, and the bill rises steeply only when consumption crosses into the higher slabs. A household that uses 250 units pays far less per unit on average than a household that uses 550 units, which is why reducing consumption by even 50 units can save more than you expect if those units were in a high slab.

The slab rates are estimates and they vary. Protected consumers, who use very few units, may be charged at lower lifeline rates, and unprotected consumers pay the standard slabs. Commercial and industrial consumers have different tariffs entirely. Fuel price adjustments and quarterly tariff adjustments can also appear on the bill as separate lines, and those change from month to month. This guide explains the standard residential slab calculation, and you should read the lines on your own bill to see which adjustments applied in your month.

WAPDA DISCOs vs K-Electric: What Is Different?

The main difference between a public DISCO bill and a K-Electric bill is the fixed charges. In our calculator, the fixed charge is Rs 200 per month for a DISCO consumer, and Rs 350 per month for a K-Electric consumer, which includes Rs 150 extra. The energy charges from the slabs are the same in the calculator for both, and GST at 18 percent applies to the energy plus fixed charges in both cases. That means a K-Electric bill for the same units is higher, mainly because of the Rs 150 extra in fixed charges, plus the GST on that extra amount.

There are other differences in practice. K-Electric serves only Karachi, while the DISCOs serve the rest of the country, each in its own region. K-Electric's bills, complaint system, and payment channels are its own, while each DISCO has its own helpline and offices. Load shedding patterns also differ: Karachi's schedule is set by K-Electric, while other cities follow their DISCO's schedule. Our guide Load Shedding Schedule — How to Check Your City explains how to find your DISCO and your feeder schedule, whichever supplier you have, and our Load Shedding Schedule Tracker brings the published schedules together so you can check your city in one place.

The billing cycle is similar in both systems: a meter reader records the units, the bill is issued with a due date, and late payment brings a surcharge. Both systems offer online bill checking and payment through banks and mobile apps. If your bill suddenly jumps, check the units first, because a wrong meter reading is the most common cause, and then check whether you crossed into a higher slab, whether a fuel price adjustment was added, and whether the fixed charges changed. If the units look wrong, report it to your DISCO or to K-Electric before the due date, and keep a photo of your meter reading as evidence.

Worked Examples in PKR

Example one: a household uses 100 units in a month. The energy charge is 50 units at Rs 4.50, which is Rs 225, plus 50 units at Rs 9.50, which is Rs 475, for a total energy charge of Rs 700. For a DISCO consumer, add fixed charges of Rs 200 to get Rs 900, then add GST of 18 percent on Rs 900, which is Rs 162, for a total bill of Rs 1,062. For a K-Electric consumer, add fixed charges of Rs 350 to get Rs 1,050, then add GST of 18 percent, which is Rs 189, for a total bill of Rs 1,239. The difference is Rs 177 for the same 100 units.

Example two: a household uses 300 units. The energy charge is Rs 225 for the first 50 units, Rs 475 for the next 50, Rs 1,300 for the next 100 at Rs 13.00, and Rs 1,800 for the last 100 at Rs 18.00, for a total of Rs 3,800. For a DISCO consumer, add Rs 200 to get Rs 4,000, then add GST of Rs 720, for a total of Rs 4,720. For a K-Electric consumer, add Rs 350 to get Rs 4,150, then add GST of Rs 747, for a total of Rs 4,897. The difference is again Rs 177, because the only difference is the fixed charge and its GST.

Example three: a household uses 500 units, which crosses into the higher slabs. The energy charge is Rs 225 for the first 50 units, Rs 475 for the next 50, Rs 1,300 for the next 100 at Rs 13.00, Rs 1,800 for the next 100 at Rs 18.00, Rs 2,500 for the next 100 at Rs 25.00, and Rs 2,800 for the last 100 at Rs 28.00, for a total energy charge of Rs 9,100. For a DISCO consumer, add fixed charges of Rs 200 to get Rs 9,300, then add GST of 18 percent, which is Rs 1,674, for a total bill of Rs 10,974. For a K-Electric consumer, add fixed charges of Rs 350 to get Rs 9,450, then add GST of Rs 1,701, for a total bill of Rs 11,151. The gap between the 300-unit bill and the 500-unit bill is large, because the extra 200 units are charged at Rs 25.00 and Rs 28.00, which is why high consumption is so expensive.

How to Reduce Your Electricity Bill

The most effective saving is to keep your consumption below a slab boundary. If you use 310 units, the 10 units above 300 are charged at Rs 25.00, while the units below 300 were charged at Rs 18.00 or less. Cutting those 10 units saves Rs 250 in energy charges, plus the GST on it. If you use 210 units, cutting 10 units saves Rs 180 plus GST. The saving is largest at the top slab you are in, so check which slab your last units fall into, and target that. Fans, old fridges, and air conditioners are the biggest users in most Pakistani homes, so a fan running all night and an old fridge together can easily push a household into the next slab.

Use energy-efficient appliances where you can afford them. An inverter air conditioner uses less electricity than a non-inverter one, an LED bulb uses far less than an old bulb, and a modern fridge uses less than a twenty-year-old one. Switch off lights and fans in empty rooms, and use natural light during the day. If you have a UPS, remember that it also consumes electricity while charging, and an overloaded UPS wastes power. Solar panels are a bigger investment, but for a household with high consumption, they can cut the bill substantially, and net metering lets you sell extra units back to the grid in some areas, so check the net metering policy of your DISCO or K-Electric.

Check your bill every month, and compare the units with the previous month and the same month last year. A sudden jump usually means a faulty appliance, a wrong meter reading, or a change in the weather, such as a heatwave pushing the air conditioner harder. Read your meter yourself on the same date each month, and keep a note of the reading, so you can challenge a wrong bill with evidence. If the bill is wrong, report it before the due date, because paying first and complaining later is slower than getting the bill corrected.

Common Mistakes and FAQ

The most common mistake is multiplying all units by one rate, instead of applying each slab only to the units inside it, which overstates the bill. The second mistake is forgetting the fixed charges and the GST, which together add hundreds of rupees. The third mistake is comparing a DISCO bill with a K-Electric bill without accounting for the different fixed charges. The fourth mistake is not reading the fuel price adjustment and quarterly adjustment lines, which can be a large part of the bill in some months. The fifth mistake is paying a wrong bill without checking the meter reading first.

How much is the electricity bill for 200 units? The energy charge is Rs 225 plus Rs 475 plus Rs 1,300, which is Rs 2,000. Add fixed charges of Rs 200 for a DISCO, or Rs 350 for K-Electric, and then add 18 percent GST. That gives Rs 2,596 for a DISCO and Rs 2,773 for K-Electric. Why is my bill higher than the calculator? The calculator uses the standard slab estimates, while your bill may include fuel price adjustments, quarterly adjustments, arrears, or a different tariff category, so read the lines on your bill and compare them with the calculator.

Is WAPDA the same as K-Electric? No, WAPDA is the name people use for the public DISCOs that serve most of Pakistan, while K-Electric is the private utility that serves Karachi, with higher fixed charges. Which DISCO serves my city? Lahore is LESCO, Islamabad is IESCO, Faisalabad is FESCO, Multan is MEPCO, Peshawar is PESCO, Hyderabad is HESCO, Sukkur is SEPCO, and Quetta is QESCO. Estimate your own bill now with our free Electricity Bill Calculator, use our Sales Tax (GST) Calculator Pakistan to add or remove GST from any amount, and read our guide Sales Tax (GST) in Pakistan — 18% Explained to understand the GST line on your bill.

About the author

By Marwat. Marwat is the founder of PakTools, Pakistan’s first free online tools website. He previously built QuickFreeTools for users in the United States, the United Kingdom and Australia, then built PakTools for Pakistan — 121 free tools in PKR, with Zakat, FBR tax, Urdu text and image tools that run entirely in your browser. Every formula on PakTools is checked against official sources such as FBR slabs, HEC rules and PMDC weightings, and labelled as an estimate where rates change.

More about Marwat and PakTools →

Related tool

Electricity Bill Calculator →

Estimate your monthly electricity bill from units consumed, slab by slab.

← Back to all posts