PakTools logoPakToolsPakistan's First Free Online Tools

Education

MDCAT Aggregate Calculator — How to Work Out Your Admission Aggregate

By Marwat • Published 16 November 2026 • Updated 16 November 2026 • 17 min read • 3,048 words

How to calculate your MDCAT aggregate in Pakistan: PMDC weightings 50% test, 40% FSc, 10% matric, worked examples, ECAT weightings, and the free aggregate calculator.

Try the free tool →

MDCAT / ECAT Aggregate Calculator in Pakistan

Calculate your MDCAT or ECAT admission aggregate with official weightings — test, FSc and Matric.

PakTools homepage showing the list of free tools including the MDCAT Aggregate Calculator
The PakTools homepage — find the tool from the homepage or the search bar.

Every year, hundreds of thousands of students in Pakistan sit the MDCAT for admission to medical and dental colleges, and almost all of them ask the same question afterwards: what is my aggregate? The aggregate is the single number that decides your place on the merit list, and it is not the same as your MDCAT score. It combines your entry test marks, your FSc marks, and your Matric marks with fixed weightings set by the Pakistan Medical and Dental Council (PMDC). This guide explains how the MDCAT aggregate is calculated, works through real examples, covers the ECAT formula for engineering admissions, and shows you how to check your result with our free [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]].

The key idea is weighting. Your MDCAT test counts for 50 percent of the aggregate, your FSc counts for 40 percent, and your Matric counts for 10 percent. That means the entry test is the single biggest factor, but your FSc and Matric still matter: a student with strong FSc marks can beat a student with a slightly higher test score, and a weak Matric result costs you a small but real slice of the aggregate. Understanding the weightings tells you where to focus your effort and stops you from overreacting to a single result.

Weightings can change, so confirm the current year’s policy with PMDC and with the admitting university in your province — for example the University of Health Sciences (UHS) in Punjab — before you rely on the aggregate for a decision. The weightings in this guide are the standard PMDC formula used by the calculator on this site. To check your own aggregate in seconds, try the [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] after reading the worked examples below.

What Is the MDCAT Aggregate?

The MDCAT aggregate is a percentage that combines three results into one number. Each result is first converted to a percentage, then multiplied by its weight, and the three weighted parts are added together. The formula is: aggregate equals 50 percent of your MDCAT percentage, plus 40 percent of your FSc percentage, plus 10 percent of your Matric percentage. The result is a number out of 100, usually shown to two or three decimal places, and merit lists are ordered by this number.

The MDCAT itself is a test of 200 marks, covering Biology, Chemistry, Physics, English, and Logical Reasoning. Your MDCAT percentage is your obtained marks divided by 200, multiplied by 100. Your FSc percentage is your obtained marks divided by the total marks of your FSc, which is usually 1100 for pre-medical students in Punjab, multiplied by 100. Your Matric percentage is your obtained marks divided by the total Matric marks, usually 1100 in Punjab, multiplied by 100. If your board uses a different total, use your own board’s total, not Punjab’s.

Because the aggregate is a weighted average, a small change in the MDCAT has a larger effect than the same change in FSc, and a change in FSc has a larger effect than the same change in Matric. A 10 percent improvement in your MDCAT percentage adds 5 points to your aggregate, while a 10 percent improvement in FSc adds 4 points and a 10 percent improvement in Matric adds only 1 point. That is the maths behind the advice that repeaters should focus on the entry test: it is the only component they can still change, and it is also the most heavily weighted one.

The PMDC Weightings Explained

The PMDC weightings for MDCAT are 50 percent for the entry test, 40 percent for FSc, and 10 percent for Matric. These weightings have been stable in recent years, but PMDC and the provincial admitting universities review the admission policy each year, so check the current year’s policy before you apply. If the weightings change, the calculator on this site will be updated, but your own calculation should always use the policy for the year you are applying in, not the policy from a previous year’s guide.

For ECAT, the engineering entry test run by UET, the weightings are different: the entry test counts 30 percent and FSc counts 70 percent, and Matric is not counted at all. That means FSc matters far more for engineering admissions than for medical admissions. A student applying for both MDCAT and ECAT needs to calculate two different aggregates with two different formulas, and our [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] lets you pick MDCAT or ECAT and applies the right weightings for each.

Some universities and provinces add their own rules on top of the PMDC formula, such as a minimum MDCAT passing percentage, a requirement for specific FSc subjects, or different merit lists for open merit, provincial quotas, and reserved seats. The aggregate is the same, but the closing merit differs by quota, so a student who misses open merit may still qualify under a quota. Check the admission policy of the university you are applying to, and read the previous year’s merit lists for your quota, not just the open-merit list.

How to Calculate Your MDCAT Aggregate Step by Step

Step one is to gather your three results: your MDCAT obtained marks out of 200, your FSc obtained marks and total marks, and your Matric obtained marks and total marks. Use the official results, not the marks you remember from the exam hall. If you have not received your MDCAT result yet, you can still estimate the aggregate by trying different test scores in the calculator, which is useful for deciding whether to prepare for a repeat attempt.

Step two is to convert each result to a percentage. Divide your obtained marks by the total marks and multiply by 100. For example, 170 out of 200 in MDCAT is 85 percent, 950 out of 1100 in FSc is 86.36 percent, and 1000 out of 1100 in Matric is 90.91 percent. Do the division carefully, because a small error here carries through the whole calculation. Our [[Percentage Calculator|/tools/everyday/percentage-calculator]] can do each conversion for you if you want to check the arithmetic.

Step three is to apply the weightings. Multiply your MDCAT percentage by 0.50, your FSc percentage by 0.40, and your Matric percentage by 0.10. Step four is to add the three weighted parts together. The sum is your aggregate. For the example above, the weighted parts are 42.50 from MDCAT, 34.55 from FSc, and 9.09 from Matric, which add up to 86.14 percent. That is the aggregate. Our [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] shows each weighted contribution separately, so you can see exactly where your aggregate comes from.

MDCAT Aggregate Calculator page on PakTools with fields for test, FSc and matric marks
The MDCAT / ECAT Aggregate Calculator — enter your marks and it applies the official weightings.

Worked Example: A Strong Candidate

Consider Ahmed from Lahore. He scored 180 out of 200 in MDCAT, 1020 out of 1100 in FSc, and 1050 out of 1100 in Matric. His MDCAT percentage is 180 divided by 200, which is 90 percent. His FSc percentage is 1020 divided by 1100, which is 92.73 percent. His Matric percentage is 1050 divided by 1100, which is 95.45 percent. Now apply the weightings: MDCAT contributes 90 multiplied by 0.50, which is 45.00. FSc contributes 92.73 multiplied by 0.40, which is 37.09. Matric contributes 95.45 multiplied by 0.10, which is 9.55. Add them together: 45.00 plus 37.09 plus 9.55 equals 91.64 percent. Ahmed’s aggregate is 91.64 percent.

Ahmed’s example shows how a strong FSc and Matric lift the aggregate above the test score alone. His MDCAT percentage is 90, but his aggregate is 91.64, because his FSc and Matric percentages are higher than his test percentage and they pull the weighted average up. The opposite is also true: a student with a high test score but weak FSc will have an aggregate below the test percentage. That is why students are told to protect their FSc marks even while they prepare for the entry test.

Try Ahmed’s numbers in our [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] to confirm the result, then replace them with your own marks. If you are still preparing, try the test score you are aiming for and see what aggregate it gives you with your actual FSc and Matric. That tells you the test score you need for the college you want, which is a much more useful target than a vague aim to do well.

Worked Example: A Repeater Improving the Test Score

Consider Fatima from Karachi, who is repeating MDCAT. Her FSc is 900 out of 1100, which is 81.82 percent, and her Matric is 950 out of 1100, which is 86.36 percent. In her first attempt she scored 150 out of 200 in MDCAT, which is 75 percent. Her aggregate was 75 multiplied by 0.50, which is 37.50, plus 81.82 multiplied by 0.40, which is 32.73, plus 86.36 multiplied by 0.10, which is 8.64, giving a total of 78.87 percent. She missed the merit list for the college she wanted.

In her second attempt she scored 175 out of 200, which is 87.5 percent. Her FSc and Matric are unchanged, because those results are fixed. Her new aggregate is 87.5 multiplied by 0.50, which is 43.75, plus 32.73 from FSc, plus 8.64 from Matric, giving a total of 85.12 percent. The improvement of 25 marks in the test raised her aggregate by 6.25 points, from 78.87 to 85.12. That is the leverage of the 50 percent weighting: every extra mark in MDCAT, out of 200, adds 0.25 points to the aggregate.

Fatima’s example also shows the limit of repeating. Her FSc contributes 32.73 points and her Matric contributes 8.64 points, and neither can change. Even with a perfect MDCAT score of 200 out of 200, her aggregate would be 50 plus 32.73 plus 8.64, which is 91.37 percent. That ceiling is worth knowing before you decide to repeat: work out your maximum possible aggregate with your actual FSc and Matric, and check whether it reaches the closing merit of the college you want. If it does not, consider other colleges, other quotas, or a different field rather than repeating indefinitely.

ECAT Aggregate for Engineering Admissions

ECAT, the engineering entry test run by UET, uses a different formula. The entry test counts 30 percent and FSc counts 70 percent, and Matric is not counted. The ECAT total is 400 marks. To calculate your ECAT aggregate, convert your ECAT score to a percentage by dividing your obtained marks by 400 and multiplying by 100, convert your FSc to a percentage the same way, then multiply the ECAT percentage by 0.30 and the FSc percentage by 0.70 and add the two together.

For example, a student with 300 out of 400 in ECAT has 75 percent, and with 950 out of 1100 in FSc has 86.36 percent. The ECAT contribution is 75 multiplied by 0.30, which is 22.50. The FSc contribution is 86.36 multiplied by 0.70, which is 60.45. The aggregate is 22.50 plus 60.45, which is 82.95 percent. Notice how much FSc matters here: a 10 percent improvement in FSc adds 7 points to the ECAT aggregate, while the same improvement in the test adds only 3 points. Engineering applicants should therefore protect their FSc marks even more carefully than medical applicants.

Our [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] handles both formulas. Pick ECAT, enter your test marks with the total set to 400, enter your FSc obtained and total marks, and it shows the weighted contributions and the final aggregate. If you are applying for both medical and engineering, calculate both aggregates separately and do not mix the formulas, because the weightings and the test totals are different.

How to Use the Aggregate Calculator on PakTools

Open the [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]] from the PakTools homepage or the Education category. Pick MDCAT or ECAT first, because the choice changes the weightings and the test total. For MDCAT, enter your test marks with the total set to 200. For ECAT, enter your test marks with the total set to 400. Then enter your FSc obtained and total marks, and for MDCAT, your Matric obtained and total marks as well.

Read the result in parts: the calculator shows each component as a percentage, each weighted contribution, and the final aggregate. The weighted contributions are the most useful part, because they show you where your aggregate comes from and where improvement would pay off most. If your MDCAT contribution is low relative to your FSc contribution, the test is your weak point. If your FSc contribution is low, the test alone cannot fully compensate, because FSc carries 40 percent of the weight.

Use the calculator to plan, not just to check. Before the test, enter your target test score and see the aggregate it would give you with your real FSc and Matric. After the test, enter your actual score and see where you stand against last year’s closing merit for your chosen colleges. The calculation runs entirely in your browser, so your marks are never uploaded or stored, and you can run as many scenarios as you like.

Understanding Merit Lists and Closing Merit

After the aggregate is calculated, the admitting university publishes a merit list, which is the ranking of all applicants by aggregate, and the closing merit, which is the aggregate of the last student admitted. The closing merit is different for every college, every province, and every quota, so there is no single number that guarantees admission. A government medical college in Lahore may close at an aggregate above 90 percent on open merit, while a college in another district or a private college may close much lower. The only reliable figure is the previous year’s closing merit for the specific college and quota you are applying for, published by the admitting university.

Closing merit changes every year. If the MDCAT paper is easier, scores rise and the closing merit rises with them. If more students apply, the competition increases and the closing merit rises. If new seats are added, the closing merit may fall. That is why comparing your aggregate with last year’s closing merit is a guide, not a guarantee: use it to judge whether you are comfortably above, borderline, or below, and apply to a range of colleges rather than only one. Apply to your first-choice college, to two or three realistic choices, and to at least one safe choice where your aggregate is comfortably above last year’s closing merit.

Merit lists are usually published in rounds. The first list fills most seats, and later lists fill the seats left by students who did not join or who moved to another college. If your aggregate is just below the first list’s closing merit, do not give up: later lists often close lower, and the final closing merit can be a point or more below the first list. Keep checking the admitting university’s website after each list, and keep your documents ready, because the time to join after a list is published is short, and a missing document can cost you a seat you earned.

How Repeaters Should Prepare

Repeating MDCAT is common in Pakistan, and many students improve their aggregate substantially on a second or third attempt, because the test is the only component they can change and it carries half the weight. The decision to repeat should be based on the numbers: calculate your maximum possible aggregate with your fixed FSc and Matric and a perfect test score, and check whether it reaches the closing merit of the college you want. If the maximum is below the closing merit, repeating the test alone will not get you there, and you should consider other colleges, other quotas, or a different field.

If you do repeat, prepare differently from the first time. Analyse your previous result subject by subject: Biology, Chemistry, Physics, English, and Logical Reasoning. The subjects where you lost the most marks are where the most improvement is available, and a focused plan on two weak subjects is more effective than repeating the whole syllabus evenly. Use past papers and the official PMDC syllabus, because the test is based on a published syllabus and the same topics appear every year in different forms. Joining an academy helps some students, but self-study with a disciplined timetable works for others, and the choice should depend on how you learn best, not on what your friends are doing.

Look after your health and your routine while you prepare. A repeater who studies twelve hours a day for three months and burns out before the test does worse than a repeater who studies eight hours a day steadily for six months. Sleep, food, and prayer times structure the day, and the [[Namaz Time Calculator|/tools/islamic/namaz-time-calculator]] can help you plan study blocks around the five prayers. Take full-length mock tests under timed conditions, because the MDCAT is a test of speed as well as knowledge, and many students lose marks by spending too long on hard questions and leaving easy ones unanswered.

Common Mistakes to Avoid

The first mistake is using the MDCAT score as the aggregate. Your MDCAT marks out of 200 are only half the story; the aggregate also includes FSc and Matric, and students who ignore them are surprised by the merit list. The second mistake is using the wrong test total, for example dividing MDCAT marks by 400 or ECAT marks by 200, which halves or doubles the test percentage. The third mistake is using the wrong FSc total: pre-medical FSc in Punjab is out of 1100, but other boards and other groups use different totals, so use your own board’s total.

The fourth mistake is averaging the three percentages directly instead of weighting them. A simple average of 90, 92.73, and 95.45 is 92.73, but the correct weighted aggregate for Ahmed’s example is 91.64, because the test carries half the weight and Matric carries only a tenth. The fifth mistake is using last year’s weightings without checking whether PMDC changed them for the current year. The sixth mistake is comparing your aggregate with the closing merit of a different quota or a different province, which can be several points higher or lower than the merit for your own quota.

Finally, remember that the aggregate is a number, not a verdict on your ability. A student who misses medical merit can still have a strong career in allied health sciences, pharmacy, engineering, or another field, and many successful doctors and engineers took a second attempt or a different route. Calculate your aggregate accurately with our [[MDCAT / ECAT Aggregate Calculator|/tools/education/mdcat-ecat-aggregate-calculator]], check it against the real closing merits, and make your decision with the numbers in front of you. For more on how your academic record converts to percentage, see our related guide on [[converting CGPA to percentage|/guides/cgpa-to-percentage-converter-hec-guide]].

Frequently Asked Questions

What are the MDCAT weights?

Under the PMDC formula, the entry test counts 50%, FSc 40% and Matric 10% of the aggregate. Confirm the current year’s policy before applying, because weightings can change.

Does Matric count for ECAT?

No. Under the UET formula, ECAT is 30% entry test and 70% FSc. Matric marks are not counted for ECAT.

What is the MDCAT total marks?

MDCAT total is 200 marks. ECAT total is 400 marks — set the total field to match your test. Always use the obtained and total marks from your official result, not a percentage you remember.

What aggregate do I need for a government medical college?

It changes every year with the merit list, and it differs by province, by college, and by quota. As a rough guide, competitive government colleges in Punjab have historically required high aggregates, but the only reliable figure is the previous year’s closing merit for the college you want, published by the admitting university.

Can I improve my aggregate after FSc?

Your FSc and Matric marks are fixed once the results are declared, so the only part you can still change is the entry test. That is why repeaters focus almost entirely on the MDCAT itself: a strong test score is the lever that moves the aggregate most.

Related tools

Related guides

About the author

Marwat is the founder of PakTools, Pakistan’s first free online tools website. He builds free, privacy-first tools for Pakistan — no sign-up, nothing uploaded — and writes these guides from the tools themselves, with figures checked against the tool’s own calculations.

Last updated: 15 November 2026 • Reviewed by: Marwat

← Back to all guides • Read the blog