PakTools logoPakToolsPakistan's First Free Online Tools

Fence Material Calculator in Pakistan

Work out how many fence posts, panels, rails and bags of concrete your fence needs.

Height does not change the post count, but taller fences need deeper post holes and stronger posts.

Your result

Posts needed
13 posts
Panels needed
13 panels
Rails needed (2 per panel)
26 rails
Concrete bags (25 kg, 1 per post)
13 bags
Assumption
1 bag of 25 kg concrete mix per post. Deeper holes or taller fences may need more — check your post-hole depth with your supplier.

🔒 Runs in your browser. Nothing uploaded.

How to use

  1. 1

    Enter the total fence length and your post spacing.

  2. 2

    Enter your panel width.

  3. 3

    Buy the posts, panels, rails and concrete bags shown.

Formula / How it works

Posts needed = fence length / post spacing, rounded down, + 1 (for the final end post).

Panels needed = fence length / panel width, rounded up.

Rails = panels x 2.

Concrete bags = posts x 1 (25 kg bag per post).

Assumption: 1 x 25 kg bag of concrete per post. Fence height is recorded for your reference and does not change these counts.

Frequently asked questions

Why is it posts = length / spacing + 1?

Because a fence needs a post at both ends. If posts are 8 ft apart along a 100 ft fence, there are 12 gaps between posts, so 13 posts are needed — one at the start of each gap plus the final one.

How deep should fence post holes be?

A common rule is one-third of the post length underground — so a 6 ft fence needs posts set about 2 ft deep. In soft or windy ground, go deeper and use concrete.

How many rails does a fence need?

Two horizontal rails per panel is standard for a fence up to about 6 ft high. Taller fences, or fences in windy areas, often use three rails for extra strength.

How much concrete do I need per fence post?

About one 25 kg bag of ready-mix concrete per post is a reasonable estimate for a standard hole. Larger or deeper holes need more — mix to the depth and width you actually dig.

Should post spacing match panel width?

Usually yes — panels are made to fit between posts at a set spacing, commonly 6 ft or 8 ft. Keep the spacing equal to the panel width so panels fit without cutting.

Was this Fence Material Calculator helpful?

Last updated: 15 November 2026 | Reviewed by: Marwat